1500mAh Battery | 5–30W Output | 2.2" HD Touch Screen | XLIM Top Fill Cartridge | Super Pulse System | USB-C 5V/2A
🔎 What the Xlim 3 Ultra Is Really About
The OXVA Xlim 3 Ultra is positioned by OXVA as its most advanced XLIM model to date, aimed at users who want a larger screen and more control than simpler pod systems offer. The standout feature is the 2.2-inch HD full touch screen, which adds a more advanced interface and makes wattage adjustment and settings navigation simpler than traditional button systems.
Inside, the device combines a 1500mAh battery, a 5–30W adjustable output, a side airflow slider, and support for XLIM Top Fill cartridges in multiple resistances. The standard kit ships with both a 0.6Ω and a 0.8Ω cartridge, giving you two different starting points right out of the box.
The main reason to consider the Ultra over other XLIM devices is the screen and control. If touchscreen adjustment and a more feature-rich interface matter to you, the Ultra may be better suited to your needs. If you prefer fewer settings, there are simpler options in the lineup.
⚡ Xlim 3 Ultra at a Glance
Want to compare with other options? Browse the Pod Systems Collection at Puffat Store.
👤 Who Is the Xlim 3 Ultra Built For?
The Xlim 3 Ultra targets users who want more control and a more interactive interface from a compact pod system.
1. Users who want screen-based control. If you prefer adjusting wattage directly and seeing information like coil resistance, battery percentage and puff count on a display, the touchscreen is one of the key reasons to consider the Ultra.
2. Users who move between MTL and RDL. The combination of adjustable wattage, side airflow control and multiple cartridge resistances allows users to move between a tighter MTL draw and a more open light RDL setup.
3. Users upgrading from a simpler pod system. If you've used a basic pod before and want more control without moving to a full mod setup, the Ultra provides additional adjustment options while retaining the compact XLIM format.
Who it may not suit: Users who prefer fewer settings may want to compare simpler screenless pod systems that require less configuration.
✨ Design & Build
The Xlim 3 Ultra uses a Zinc Alloy + PCTG construction. The device measures 121.9 × 28.9 × 16.5 mm and weighs 90g, combining a compact pod-system format with a larger battery and touchscreen interface.
The front panel is dominated by the 2.2-inch HD full touch display, which OXVA positions as the first full touchscreen on a pod vape. It supports touch and swipe navigation, display themes, and a screen lock function.
🔥 XLIM Cartridges & Super Pulse Technology
The device works with XLIM Top Fill cartridges, with OXVA listing 0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω resistance options. This gives users several choices for adjusting draw style and power level.
The most open resistance option, intended for higher-power RDL setups.
A lower-resistance option for users who prefer a more open draw and higher-power setup.
A higher-resistance option suited to lower-power MTL settings and a tighter draw.
The highest-resistance compatible option for users looking for a tighter MTL setup at lower power.
According to OXVA, the Super Pulse System is designed to reduce output drop as the battery level decreases and maintain more consistent output during use. The device provides an adjustable output range of 5–30W for different compatible cartridge setups.
🔋 Battery & Charging
The Xlim 3 Ultra uses a 1500mAh built-in battery with USB-C 5V/2A charging. OXVA advertises fast charging that reaches up to 80% in approximately 30 minutes.
Actual battery runtime varies depending on the cartridge resistance, wattage setting, airflow and individual usage, so there is no single runtime figure that applies to every user.
📝 What to Know Before Buying
The touchscreen is a major part of the experience. If you don't need a touchscreen, you may want to compare other XLIM devices with simpler interfaces.
The device weighs 90g. Consider the weight alongside its 1500mAh battery and 2.2-inch touchscreen when comparing it with smaller pod systems.
Compatible with XLIM Top Fill cartridges. OXVA lists 0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω as compatible resistance options.
Wattage should match the cartridge. Different resistance options are designed to operate across different power ranges, so use the recommended range for the cartridge installed.
💡 Getting Started Tip: The standard kit includes both 0.6Ω and 0.8Ω XLIM Top Fill cartridges. The 0.8Ω option is aimed at a tighter MTL setup, while the 0.6Ω option provides a more open draw. Start within the recommended wattage range for the cartridge you choose.
🧃 Choosing E-Liquid for the Xlim 3 Ultra
Cartridge resistance and power setting both matter when choosing an e-liquid. Higher-resistance options such as 0.8Ω and 1.2Ω are typically used for lower-power MTL setups, while lower-resistance options such as 0.4Ω and 0.6Ω can provide a more open draw.
OXVA lists the XLIM Top Fill cartridge platform as compatible with both nicotine salt and freebase e-liquids. Your choice should take into account nicotine strength, cartridge resistance, power setting and your preferred draw style.
Puffat Store offers imported and Egyptian e-liquid options for different setups.
📋 OXVA Xlim 3 Ultra Specifications
❓ OXVA Xlim 3 Ultra Questions
🎯 Puffat Take – Is the Xlim 3 Ultra Right for You?
The OXVA Xlim 3 Ultra is designed for users who value a large touchscreen, adjustable 5–30W output, adjustable airflow and access to multiple XLIM Top Fill cartridge resistances.
Users who prefer a simpler device with fewer settings may want to compare other pod systems. For users who specifically value touchscreen control and additional adjustment options, the Xlim 3 Ultra is an option worth considering.
The main distinction of the Xlim 3 Ultra is its combination of the XLIM cartridge platform with a larger touchscreen interface and adjustable controls.
Fast delivery across Egypt | 100% authentic products | Cash on delivery
